When homeowners decide to renovate their living spaces, the desire to incorporate smart home technologies is increasingly high on the list of priorities. The convenience that comes with automatic lighting control is incomparable to classic, manual solutions. However, the fear of lengthy and invasive construction work discourages many from realizing this vision.
The classic installation of motorized blinds always required an electrician to run power to each window. This meant breaking up plaster, cutting walls, creating a lot of dust, and the additional cost of plastering and painting the entire space. For those who simply wanted to refresh their interior, such an intervention was often completely unacceptable.
In older apartments or even newer buildings where smart installations were not considered during the original construction, there are simply no electrical connections planned around the windows. Any subsequent intervention in the existing wiring is complex, as it requires finding the nearest junction boxes and careful planning of new lines. Such work increases the cost of the entire window modernization project.
If the investor decides to avoid breaking down walls, the only classic alternative is to use surface-mounted cable ducts. These plastic ducts grossly interfere with the visual appearance of the space and destroy the feeling of clean lines and minimalism that we want to achieve with the installation of modern blinds. The visual result often looks unfinished and unprofessional.
The lack of installations therefore requires an innovative solution that brings smart functions directly into the device itself, without relying on external power sources. Technological developments have solved this problem by integrating powerful, long-lasting energy sources directly into the heart of the shading mechanism itself.
This design allows the window to become fully automated without a single visible wire. The installer simply installs two inconspicuous side brackets, attaches the cassette with the internal roller blind and the system is mechanically ready for use in a few minutes. The absence of noisy construction work allows for a quick transformation of the entire apartment in a single morning.
Despite their cordless design, these motors offer exceptional lifting power and millimetre-level precision that is fully comparable to that of 230V wired motors. Your smart roller blind will raise and lower quietly, smoothly and reliably, which is key to achieving a premium user experience in the modern home.
The “Plug & Play” philosophy means that the entire process from installation to first use is simplified to the extreme. Immediately after the mechanical assembly of the blind, which does not require a visit from an electrician, the motor is activated and the system is ready to connect. The process is carried out via a secure wireless connection on your smartphone.
The user simply scans the unique QR code attached to the motor with a smart device, and the shade securely connects to the existing home network in seconds. This integration does not require special IT skills, complex programming or setting complicated IP addresses, making the technology accessible to every average user.
Even if you ever decide to change your smartphone or move to a different digital ecosystem, Motion Blinds technology allows for quick reconfiguration. The device simply stays on the window, and you can seamlessly transfer it to your new smart home control center with a few clicks.
The biggest concern with battery-powered solutions is usually the worry of frequent charging and complicated maintenance. That's why engineers have developed smart motors that are extremely energy-efficient in standby mode. In practice, this means that the integrated battery allows the blind to operate for months on a single charge.
When the battery finally runs out after six months or more, the smart home system will alert the user with a notification on their phone. The charging process is then quite simple, as the motor has a standard USB-C connector on its head. You don't need any special chargers, as you can use the one you normally use to charge your smartphone, or a portable battery (powerbank).
There is no need to remove the canvas, disassemble the mechanism or call a service technician while charging. Simply plug the USB-C cable into the motor, let it charge for a few hours, and your indoor roller blind is ready for a long period of automated and wireless operation again.
The battery-powered design does not limit the smart features of these devices. The motors communicate via modern standards such as Bluetooth and Thread, which allows them to communicate instantly and two-way with Apple HomeKit, Google Home or Amazon Alexa central stations. The system therefore informs you of the exact position and battery status of each shade at any time.
With a successful connection, your older home becomes a true technological marvel. You can integrate the battery-powered roller blinds into advanced daily routines via the app, such as automatically raising them at sunrise or gradually dimming the room when you arrive home from work. With voice commands, you can darken the entire living room using only your voice.
In addition to comfort, this digitalization also enables security functions, such as presence simulation during vacations, and energy savings with automatic blinds during the summer heat. The transformation of your home is both aesthetic and functional, without a single cable in sight.
Switching to smart battery systems is an ideal way to modernize, but despite the simplicity of installation, it requires the right choice of components and professional measurement. Different windows and different lighting requirements dictate careful selection of technical fabrics (screen, blackout) and adjustment of the power of the battery motor itself according to the weight of the fabric.
To complete your smart renovation, we invite you to find authorized partners and dealers in the Interlux network. Our field staff will provide you with expert advice, take precise measurements, and ensure that the installation of your new battery-operated roller blinds is quick, clean, and professional.
